First, the composition:

The product is formulated from epoxy resin, coal tar pitch, anti-rust pigment, auxiliary agent and modified amine. The product has the advantages of rapid drying, good adhesion and good flexibility, and is convenient for two-component packaging and construction. It has the characteristics of acid resistance, alkali resistance, salt resistance, water resistance and oil resistance.

Second, characteristics and uses:

The paint combines the high mechanical strength, high adhesion, chemical medium corrosion resistance and asphalt water resistance, anti-microbial and anti-plant root characteristics. It is a high-performance anti-corrosion insulating coating. Chemical resistance and water resistance.

Applicable to the anti-corrosion of equipment and pipelines for oil, gas, water pipelines, tap water, gas, pipelines, refineries, chemical plants, sewage treatment plants, as well as anti-corrosion and mines for offshore oil rigs and ship water. Anti-corrosion of underground equipment.

Third, construction and storage:

(1) The surface of the base iron shall be treated with Sa2.5 grade before painting. It is strictly forbidden to bring in water, dust and oil during construction to ensure the quality of painting.

(2) The ratio of coatings is: component A (base), component B (curing agent) = 10kg paint; 1kg curing agent (or according to the ratio of construction indicated by our factory).

(3) The method of construction ratio is as follows: open the large component of the component A, add the component B to the component A, and mix well. After aging for 30 minutes, it can be applied.

(4) This material is required to be used as needed, and the proportioned paint must be used within six hours. Unfilled materials should be sealed and stored.

(5) Construction should be stopped when it is rainy or the relative humidity is greater than 75%. For areas with severe corrosive media, multiple passes are recommended.

(6) The product should be stored in a cool and dry place to prevent direct sunlight, to isolate the source of ignition, and to keep away from heat.

(7) The storage period is 12 months. After the expiration, the technical indicators should be inspected. If the requirements are met, they can continue to be used.